Pipe650STD: Sizes, Dimensions and Properties
Full section properties for Pipe650STD. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | D (mm) | t (mm) | A (cm2) | I (cm4) | Z (cm3) | S (cm3) | r (cm) |
|---|---|---|---|---|---|---|---|---|
| Pipe650STD | 153 | 660 | 8.86 | 182 | 96,600 | 2,920 | 3,770 | 23 |
Pipe650STD PIPE
- Designation
- Pipe650STD
- Serial Size
- 650std
- Mass per Metre
- 153 kg/m
- Cross-Sectional Area
- 182 cm2
- Outside Diameter (D)
- 660 mm
- Wall Thickness (t)
- 8.86 mm
- Second Moment of Area I
- 96,600 cm4
- Elastic Modulus Z
- 2,920 cm3
- Plastic Modulus S
- 3,770 cm3
- Radius of Gyration r
- 23 cm
- Inner Diameter
- 643
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
650std PIPE Overview
The 650std serial size group contains 1 section, ranging from 153 kg/m to 153 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.