Pipe125XS: Sizes, Dimensions and Properties
Full section properties for Pipe125XS. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | D (mm) | t (mm) | A (cm2) | I (cm4) | Z (cm3) | S (cm3) | r (cm) |
|---|---|---|---|---|---|---|---|---|
| Pipe125XS | 30.9 | 141.3 | 8.86 | 37 | 812 | 115 | 156 | 4.7 |
Pipe125XS PIPE
- Designation
- Pipe125XS
- Serial Size
- 125xs
- Mass per Metre
- 30.9 kg/m
- Cross-Sectional Area
- 37 cm2
- Outside Diameter (D)
- 141.3 mm
- Wall Thickness (t)
- 8.86 mm
- Second Moment of Area I
- 812 cm4
- Elastic Modulus Z
- 115 cm3
- Plastic Modulus S
- 156 cm3
- Radius of Gyration r
- 4.7 cm
- Inner Diameter
- 122
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
125xs PIPE Overview
The 125xs serial size group contains 1 section, ranging from 30.9 kg/m to 30.9 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.