Pipe400STD: Sizes, Dimensions and Properties
Full section properties for Pipe400STD. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | D (mm) | t (mm) | A (cm2) | I (cm4) | Z (cm3) | S (cm3) | r (cm) |
|---|---|---|---|---|---|---|---|---|
| Pipe400STD | 93.1 | 406.4 | 8.86 | 111 | 21,900 | 1,080 | 1,400 | 14 |
Pipe400STD PIPE
- Designation
- Pipe400STD
- Serial Size
- 400std
- Mass per Metre
- 93.1 kg/m
- Cross-Sectional Area
- 111 cm2
- Outside Diameter (D)
- 406.4 mm
- Wall Thickness (t)
- 8.86 mm
- Second Moment of Area I
- 21,900 cm4
- Elastic Modulus Z
- 1,080 cm3
- Plastic Modulus S
- 1,400 cm3
- Radius of Gyration r
- 14 cm
- Inner Diameter
- 389
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
400std PIPE Overview
The 400std serial size group contains 1 section, ranging from 93.1 kg/m to 93.1 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.