Pipe500STD: Sizes, Dimensions and Properties
Full section properties for Pipe500STD. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | D (mm) | t (mm) | A (cm2) | I (cm4) | Z (cm3) | S (cm3) | r (cm) |
|---|---|---|---|---|---|---|---|---|
| Pipe500STD | 117 | 508 | 8.86 | 139 | 43,300 | 1,700 | 2,210 | 17.7 |
Pipe500STD PIPE
- Designation
- Pipe500STD
- Serial Size
- 500std
- Mass per Metre
- 117 kg/m
- Cross-Sectional Area
- 139 cm2
- Outside Diameter (D)
- 508 mm
- Wall Thickness (t)
- 8.86 mm
- Second Moment of Area I
- 43,300 cm4
- Elastic Modulus Z
- 1,700 cm3
- Plastic Modulus S
- 2,210 cm3
- Radius of Gyration r
- 17.7 cm
- Inner Diameter
- 490
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
500std PIPE Overview
The 500std serial size group contains 1 section, ranging from 117 kg/m to 117 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.