HP360X174: Sizes, Dimensions and Properties
Full section properties for HP360X174. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HP360X174 | 174 | 361 | 378 | 20.4 | 20.4 | 222 | 50,800 | 18,400 | 2,820 | 3,180 | 15.1 | 9.12 |
HP360X174 HP
- Designation
- HP360X174
- Serial Size
- 360x174
- Mass per Metre
- 174 kg/m
- Cross-Sectional Area
- 222 cm2
- Depth of Section (h)
- 361 mm
- Width of Section (b)
- 378 mm
- Web Thickness (tw)
- 20.4 mm
- Flange Thickness (tf)
- 20.4 mm
- Second Moment of Area Ixx
- 50,800 cm4
- Second Moment of Area Iyy
- 18,400 cm4
- Elastic Modulus Zxx
- 2,820 cm3
- Elastic Modulus Zyy
- 975 cm3
- Plastic Modulus Sxx
- 3,180 cm3
- Plastic Modulus Syy
- 1,500 cm3
- Radius of Gyration rxx
- 15.1 cm
- Radius of Gyration ryy
- 9.12 cm
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
360x174 HP Overview
The 360x174 serial size group contains 1 section, ranging from 174 kg/m to 174 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.