HP360X108: Sizes, Dimensions and Properties
Full section properties for HP360X108. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HP360X108 | 108 | 345 | 371 | 12.8 | 12.8 | 138 | 30,300 | 10,900 | 1,750 | 1,930 | 14.8 | 8.86 |
HP360X108 HP
- Designation
- HP360X108
- Serial Size
- 360x108
- Mass per Metre
- 108 kg/m
- Cross-Sectional Area
- 138 cm2
- Depth of Section (h)
- 345 mm
- Width of Section (b)
- 371 mm
- Web Thickness (tw)
- 12.8 mm
- Flange Thickness (tf)
- 12.8 mm
- Second Moment of Area Ixx
- 30,300 cm4
- Second Moment of Area Iyy
- 10,900 cm4
- Elastic Modulus Zxx
- 1,750 cm3
- Elastic Modulus Zyy
- 587 cm3
- Plastic Modulus Sxx
- 1,930 cm3
- Plastic Modulus Syy
- 895 cm3
- Radius of Gyration rxx
- 14.8 cm
- Radius of Gyration ryy
- 8.86 cm
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
360x108 HP Overview
The 360x108 serial size group contains 1 section, ranging from 108 kg/m to 108 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.