HP310X110: Sizes, Dimensions and Properties
Full section properties for HP310X110. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HP310X110 | 110 | 307 | 310 | 15.4 | 15.5 | 141 | 23,700 | 7,740 | 1,540 | 1,720 | 13 | 7.42 |
HP310X110 HP
- Designation
- HP310X110
- Serial Size
- 310x110
- Mass per Metre
- 110 kg/m
- Cross-Sectional Area
- 141 cm2
- Depth of Section (h)
- 307 mm
- Width of Section (b)
- 310 mm
- Web Thickness (tw)
- 15.4 mm
- Flange Thickness (tf)
- 15.5 mm
- Second Moment of Area Ixx
- 23,700 cm4
- Second Moment of Area Iyy
- 7,740 cm4
- Elastic Modulus Zxx
- 1,540 cm3
- Elastic Modulus Zyy
- 498 cm3
- Plastic Modulus Sxx
- 1,720 cm3
- Plastic Modulus Syy
- 764 cm3
- Radius of Gyration rxx
- 13 cm
- Radius of Gyration ryy
- 7.42 cm
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
310x110 HP Overview
The 310x110 serial size group contains 1 section, ranging from 110 kg/m to 110 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.