HP360X152: Sizes, Dimensions and Properties
Full section properties for HP360X152. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HP360X152 | 152 | 356 | 376 | 17.9 | 17.9 | 194 | 43,700 | 15,800 | 2,460 | 2,770 | 15 | 9.04 |
HP360X152 HP
- Designation
- HP360X152
- Serial Size
- 360x152
- Mass per Metre
- 152 kg/m
- Cross-Sectional Area
- 194 cm2
- Depth of Section (h)
- 356 mm
- Width of Section (b)
- 376 mm
- Web Thickness (tw)
- 17.9 mm
- Flange Thickness (tf)
- 17.9 mm
- Second Moment of Area Ixx
- 43,700 cm4
- Second Moment of Area Iyy
- 15,800 cm4
- Elastic Modulus Zxx
- 2,460 cm3
- Elastic Modulus Zyy
- 842 cm3
- Plastic Modulus Sxx
- 2,770 cm3
- Plastic Modulus Syy
- 1,290 cm3
- Radius of Gyration rxx
- 15 cm
- Radius of Gyration ryy
- 9.04 cm
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
360x152 HP Overview
The 360x152 serial size group contains 1 section, ranging from 152 kg/m to 152 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.