WT180X495: Sizes, Dimensions and Properties
Full section properties for WT180X495. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | cy (mm) |
|---|---|---|---|---|---|---|---|---|---|
| WT180X495 | 495 | 274 | 450 | 71.9 | 115 | 631 | 25,900 | 86,600 | 82.6 |
WT180X495 WT
- Designation
- WT180X495
- Serial Size
- 180x495
- Mass per Metre
- 495 kg/m
- Cross-Sectional Area
- 631 cm2
- Depth of Section (h)
- 274 mm
- Width of Section (b)
- 450 mm
- Web Thickness (tw)
- 71.9 mm
- Flange Thickness (tf)
- 115 mm
- Second Moment of Area Ixx
- 25,900 cm4
- Second Moment of Area Iyy
- 86,600 cm4
- Elastic Modulus Zxx
- 1,350 cm3
- Elastic Modulus Zyy
- 3,870 cm3
- Plastic Modulus Sxx
- 2,980 cm3
- Plastic Modulus Syy
- 5,980 cm3
- Radius of Gyration rxx
- 6.4 cm
- Radius of Gyration ryy
- 11.7 cm
- Centroid Distance cy
- 82.6 cm
- _note
- Tee: elasticModulusX is the single AISC Sx (controlling fibre); flange/toe split not in source.
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
180x495 WT Overview
The 180x495 serial size group contains 1 section, ranging from 495 kg/m to 495 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.