WT155X207.5: Sizes, Dimensions and Properties
Full section properties for WT155X207.5. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | cy (mm) |
|---|---|---|---|---|---|---|---|---|---|
| WT155X207.5 | 208 | 201 | 333 | 38.9 | 62.7 | 265 | 5,870 | 19,500 | 52.1 |
WT155X207.5 WT
- Designation
- WT155X207.5
- Serial Size
- 155x207.5
- Mass per Metre
- 208 kg/m
- Cross-Sectional Area
- 265 cm2
- Depth of Section (h)
- 201 mm
- Width of Section (b)
- 333 mm
- Web Thickness (tw)
- 38.9 mm
- Flange Thickness (tf)
- 62.7 mm
- Second Moment of Area Ixx
- 5,870 cm4
- Second Moment of Area Iyy
- 19,500 cm4
- Elastic Modulus Zxx
- 395 cm3
- Elastic Modulus Zyy
- 1,170 cm3
- Plastic Modulus Sxx
- 850 cm3
- Plastic Modulus Syy
- 1,800 cm3
- Radius of Gyration rxx
- 4.72 cm
- Radius of Gyration ryy
- 8.59 cm
- Centroid Distance cy
- 52.1 cm
- _note
- Tee: elasticModulusX is the single AISC Sx (controlling fibre); flange/toe split not in source.
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
155x207.5 WT Overview
The 155x207.5 serial size group contains 1 section, ranging from 208 kg/m to 208 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.