IPN 240: Sizes, Dimensions and Properties
Full section properties for IPN 240. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IPN 240 | 36.2 | 240 | 106 | 8.7 | 13.1 | 46.1 | 4,250 | 221 | 354 | 412 | 9.6 | 2.2 |
IPN 240 IPN
- Designation
- IPN 240
- Serial Size
- 240
- Mass per Metre
- 36.2 kg/m
- Depth of Section (h)
- 240 mm
- Width of Section (b)
- 106 mm
- Web Thickness (tw)
- 8.7 mm
- Flange Thickness (tf)
- 13.1 mm
- Root Radius (r)
- 8.7 mm
- Cross-Sectional Area
- 46.1 cm2
- Second Moment of Area Ixx
- 4,250 cm4
- Second Moment of Area Iyy
- 221 cm4
- Elastic Modulus Zxx
- 354 cm3
- Elastic Modulus Zyy
- 41.7 cm3
- Plastic Modulus Sxx
- 412 cm3
- Plastic Modulus Syy
- 70 cm3
- Radius of Gyration rxx
- 9.6 cm
- Radius of Gyration ryy
- 2.2 cm
- Source Doc
- en10365-arcelormittal-catalogue-2023
- Verified
- Verified Note
- Source registered. Transcribed line-by-line from the ArcelorMittal European Sections catalogue (2023). Cross-checked on ingest (radius of gyration = sqrt(I/A); mass against catalogue summary p.42). Awaiting Cat's verified sign-off. Torsion (It) and warping (Iw) constants exist in the catalogue but are omitted here for consistency with the rest of the EU set.
240 IPN Overview
The 240 serial size group contains 1 section, ranging from 36.2 kg/m to 36.2 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from EN 10365:2017 / ArcelorMittal European Sections.