IPE 550: Sizes, Dimensions and Properties
Full section properties for IPE 550. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IPE 550 | 105.5 | 550 | 210 | 11.1 | 17.2 | 134.42 | 67,120 | 2,668 | 2,441 | 2,787 | 22.35 | 4.45 |
IPE 550 IPE
- Designation
- IPE 550
- Serial Size
- 550
- Mass per Metre
- 105.5 kg/m
- Depth of Section (h)
- 550 mm
- Width of Section (b)
- 210 mm
- Web Thickness (tw)
- 11.1 mm
- Flange Thickness (tf)
- 17.2 mm
- Root Radius (r)
- 24 mm
- Cross-Sectional Area
- 134.42 cm2
- Second Moment of Area Ixx
- 67,120 cm4
- Second Moment of Area Iyy
- 2,668 cm4
- Elastic Modulus Zxx
- 2,441 cm3
- Elastic Modulus Zyy
- 254.1 cm3
- Plastic Modulus Sxx
- 2,787 cm3
- Plastic Modulus Syy
- 400.5 cm3
- Radius of Gyration rxx
- 22.35 cm
- Radius of Gyration ryy
- 4.45 cm
- Source Doc
- en10365-arcelormittal
- Verified
- Verified Note
- Source registered. Values not yet checked line-by-line against the ArcelorMittal catalogue PDF.
550 IPE Overview
The 550 serial size group contains 1 section, ranging from 105.5 kg/m to 105.5 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from EN 10365:2017 / ArcelorMittal European Sections.