IPE 200: Sizes, Dimensions and Properties
Full section properties for IPE 200. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IPE 200 | 22.4 | 200 | 100 | 5.6 | 8.5 | 28.48 | 1,943 | 142.4 | 194.3 | 220.6 | 8.26 | 2.24 |
IPE 200 IPE
- Designation
- IPE 200
- Serial Size
- 200
- Mass per Metre
- 22.4 kg/m
- Depth of Section (h)
- 200 mm
- Width of Section (b)
- 100 mm
- Web Thickness (tw)
- 5.6 mm
- Flange Thickness (tf)
- 8.5 mm
- Root Radius (r)
- 12 mm
- Cross-Sectional Area
- 28.48 cm2
- Second Moment of Area Ixx
- 1,943 cm4
- Second Moment of Area Iyy
- 142.4 cm4
- Elastic Modulus Zxx
- 194.3 cm3
- Elastic Modulus Zyy
- 28.47 cm3
- Plastic Modulus Sxx
- 220.6 cm3
- Plastic Modulus Syy
- 44.61 cm3
- Radius of Gyration rxx
- 8.26 cm
- Radius of Gyration ryy
- 2.24 cm
- Source Doc
- en10365-arcelormittal
- Verified
- Verified Note
- Source registered. Values not yet checked line-by-line against the ArcelorMittal catalogue PDF.
200 IPE Overview
The 200 serial size group contains 1 section, ranging from 22.4 kg/m to 22.4 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from EN 10365:2017 / ArcelorMittal European Sections.