S130X15: Sizes, Dimensions and Properties
Full section properties for S130X15. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S130X15 | 15 | 127 | 76.2 | 5.44 | 8.28 | 18.9 | 512 | 49.5 | 80.3 | 92.8 | 5.21 | 1.62 |
S130X15 S
- Designation
- S130X15
- Serial Size
- 130x15
- Mass per Metre
- 15 kg/m
- Cross-Sectional Area
- 18.9 cm2
- Depth of Section (h)
- 127 mm
- Width of Section (b)
- 76.2 mm
- Web Thickness (tw)
- 5.44 mm
- Flange Thickness (tf)
- 8.28 mm
- Second Moment of Area Ixx
- 512 cm4
- Second Moment of Area Iyy
- 49.5 cm4
- Elastic Modulus Zxx
- 80.3 cm3
- Elastic Modulus Zyy
- 13 cm3
- Plastic Modulus Sxx
- 92.8 cm3
- Plastic Modulus Syy
- 22.5 cm3
- Radius of Gyration rxx
- 5.21 cm
- Radius of Gyration ryy
- 1.62 cm
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
130x15 S Overview
The 130x15 serial size group contains 1 section, ranging from 15 kg/m to 15 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.