MC250X50: Sizes, Dimensions and Properties
Full section properties for MC250X50. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | cy (mm) |
|---|---|---|---|---|---|---|---|---|---|
| MC250X50 | 50 | 254 | 104 | 14.6 | 14.6 | 63.7 | 5,790 | 545 | 27.7 |
MC250X50 MC
- Designation
- MC250X50
- Serial Size
- 250x50
- Mass per Metre
- 50 kg/m
- Cross-Sectional Area
- 63.7 cm2
- Depth of Section (h)
- 254 mm
- Width of Section (b)
- 104 mm
- Web Thickness (tw)
- 14.6 mm
- Flange Thickness (tf)
- 14.6 mm
- Second Moment of Area Ixx
- 5,790 cm4
- Second Moment of Area Iyy
- 545 cm4
- Elastic Modulus Zxx
- 456 cm3
- Elastic Modulus Zyy
- 71.3 cm3
- Plastic Modulus Sxx
- 552 cm3
- Plastic Modulus Syy
- 136 cm3
- Radius of Gyration rxx
- 9.53 cm
- Radius of Gyration ryy
- 2.92 cm
- Centroid Distance cy
- 27.7 cm
- Source Doc
- aisc-shapes-v16
- Verified
- 1
- Verified Note
- Parsed directly from the official AISC Shapes Database v16.0 (SI block). Units converted to SteelSpec schema (A mm2->cm2, I 10^6 mm4->cm4, S 10^3 mm3=cm3, r mm->cm). No transcription.
250x50 MC Overview
The 250x50 serial size group contains 1 section, ranging from 50 kg/m to 50 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from AISC Shapes Database v16.0.