45x30 UA — Sizes, Dimensions & Properties
1 sizes in the 45x30 serial size group. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | A (mm) | B (mm) | t (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) |
|---|---|---|---|---|---|---|---|
| 45x30x4 | 2.25 | 45 | 30 | 4 | 2.87 | 5.78 | 2.05 |
45x30x4 UA
- Designation
- 45x30x4
- Mass per Metre
- 2.25 kg/m
- Leg Length A
- 45 mm
- Leg Length B
- 30 mm
- Thickness (t)
- 4 mm
- Root Radius (r)
- 4.5 mm
- Toe Radius (r2)
- 2.25 mm
- Cross-Sectional Area
- 2.87 cm2
- Centroid Distance cx
- 1.48 cm
- Centroid Distance cy
- 0.74 cm
- Second Moment of Area Ixx
- 5.78 cm4
- Second Moment of Area Iyy
- 2.05 cm4
- Radius of Gyration rxx
- 1.42 cm
- Radius of Gyration ryy
- 0.85 cm
- Elastic Modulus Zxx
- 1.83 cm3
- Elastic Modulus Zyy
- 0.89 cm3
- Second Moment of Area Iu
- 6.65 cm4
- Second Moment of Area Iv
- 1.18 cm4
- Radius of Gyration ru
- 1.52 cm
- Radius of Gyration rv
- 0.64 cm
- tan(alpha)
- 0.464
45x30 UA — Overview
The 45x30 serial size group contains 1 section, ranging from 2.25 kg/m to 2.25 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Need Components for This Section?
Structural Steel Components supplies stiffener plates, end plates, base plates, cleats, and fixings matched to standard UK sections.
Powered by SteelSpec
Section properties from Tata Steel Blue Book / SCI P363 / BS 4-1:2005.