30x30 SHS — Sizes, Dimensions & Properties
3 sizes in the 30x30 serial size group. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | D (mm) | t (mm) | A (cm2) | I (cm4) | Z (cm3) | S (cm3) | r (cm) |
|---|---|---|---|---|---|---|---|---|
| 30x30x2.0 | 1.72 | 30 | 2 | 2.2 | 2.84 | 1.89 | 2.29 | 1.14 |
| 30x30x2.5 | 2.11 | 30 | 2.5 | 2.68 | 3.33 | 2.22 | 2.74 | 1.11 |
| 30x30x3.0 | 2.47 | 30 | 3 | 3.14 | 3.74 | 2.5 | 3.14 | 1.09 |
30x30x2.0 SHS
- Designation
- 30x30x2.0
- Outside Dimension (D)
- 30 mm
- Wall Thickness (t)
- 2 mm
- Mass per Metre
- 1.72 kg/m
- Cross-Sectional Area
- 2.2 cm2
- Second Moment of Area I
- 2.84 cm4
- Elastic Modulus Z
- 1.89 cm3
- Plastic Modulus S
- 2.29 cm3
- Radius of Gyration r
- 1.14 cm
- Torsional Constant (It)
- 4.53 cm4
- Surface Area per Metre
- 0.115 m2/m
- Surface Area per Tonne
- 66.9 m2/t
30x30x2.5 SHS
- Designation
- 30x30x2.5
- Outside Dimension (D)
- 30 mm
- Wall Thickness (t)
- 2.5 mm
- Mass per Metre
- 2.11 kg/m
- Cross-Sectional Area
- 2.68 cm2
- Second Moment of Area I
- 3.33 cm4
- Elastic Modulus Z
- 2.22 cm3
- Plastic Modulus S
- 2.74 cm3
- Radius of Gyration r
- 1.11 cm
- Torsional Constant (It)
- 5.4 cm4
- Surface Area per Metre
- 0.114 m2/m
- Surface Area per Tonne
- 54 m2/t
30x30x3.0 SHS
- Designation
- 30x30x3.0
- Outside Dimension (D)
- 30 mm
- Wall Thickness (t)
- 3 mm
- Mass per Metre
- 2.47 kg/m
- Cross-Sectional Area
- 3.14 cm2
- Second Moment of Area I
- 3.74 cm4
- Elastic Modulus Z
- 2.5 cm3
- Plastic Modulus S
- 3.14 cm3
- Radius of Gyration r
- 1.09 cm
- Torsional Constant (It)
- 6.16 cm4
- Surface Area per Metre
- 0.112 m2/m
- Surface Area per Tonne
- 45.3 m2/t
30x30 SHS — Overview
The 30x30 serial size group contains 3 sections, ranging from 2.47 kg/m to 1.72 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Need Components for This Section?
Structural Steel Components supplies stiffener plates, end plates, base plates, cleats, and fixings matched to standard UK sections.
Powered by SteelSpec
Section properties from Tata Steel Blue Book / SCI P363 / BS 4-1:2005.