100x50 PFC — Sizes, Dimensions & Properties
1 sizes in the 100x50 serial size group. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | cy (mm) |
|---|---|---|---|---|---|---|---|---|---|
| 100x50x10 | 10.2 | 100 | 50 | 5 | 8.5 | 13 | 208 | 32.3 | 17.3 |
100x50x10 PFC
- Designation
- 100x50x10
- Serial Size
- 100x50
- Mass per Metre
- 10.2 kg/m
- Depth of Section (h)
- 100 mm
- Width of Section (b)
- 50 mm
- Web Thickness (tw)
- 5 mm
- Flange Thickness (tf)
- 8.5 mm
- Root Radius (r)
- 9 mm
- Depth Between Fillets (d)
- 65 mm
- Local Buckling Ratio d/tw
- 13
- Local Buckling Ratio cf/tf
- 5.88
- Second Moment of Area Ixx
- 208 cm4
- Second Moment of Area Iyy
- 32.3 cm4
- Elastic Modulus Zxx
- 41.5 cm3
- Elastic Modulus Zyy
- 9.9 cm3
- Plastic Modulus Sxx
- 48.9 cm3
- Plastic Modulus Syy
- 17.6 cm3
- Radius of Gyration rxx
- 4 cm
- Radius of Gyration ryy
- 1.58 cm
- Cross-Sectional Area
- 13 cm2
- Torsional Constant (It)
- 2.53 cm4
- Warping Constant (Iw)
- 0.000491 dm6
- Centroid Distance cy
- 17.3 cm
- Surface Area per Metre
- 0.382 m2/m
- Surface Area per Tonne
- 37.5 m2/t
100x50 PFC — Overview
The 100x50 serial size group contains 1 section, ranging from 10.2 kg/m to 10.2 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Need Components for This Section?
Structural Steel Components supplies stiffener plates, end plates, base plates, cleats, and fixings matched to standard UK sections.
Powered by SteelSpec
Section properties from Tata Steel Blue Book / SCI P363 / BS 4-1:2005.