HE 180 M: Sizes, Dimensions and Properties
Full section properties for HE 180 M. All dimensions in mm, section properties in cm units.
| Designation | Mass (kg/m) | h (mm) | b (mm) | tw (mm) | tf (mm) | A (cm2) | Ixx (cm4) | Iyy (cm4) | Zxx (cm3) | Sxx (cm3) | rxx (cm) | ryy (cm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HE 180 M | 88.9 | 200 | 186 | 14.5 | 24 | 114 | 7,497 | 2,581 | 750 | 886 | 8.13 | 4.77 |
HE 180 M HEM
- Designation
- HE 180 M
- Serial Size
- 180
- Mass per Metre
- 88.9 kg/m
- Depth of Section (h)
- 200 mm
- Width of Section (b)
- 186 mm
- Web Thickness (tw)
- 14.5 mm
- Flange Thickness (tf)
- 24 mm
- Root Radius (r)
- 16 mm
- Cross-Sectional Area
- 114 cm2
- Second Moment of Area Ixx
- 7,497 cm4
- Second Moment of Area Iyy
- 2,581 cm4
- Elastic Modulus Zxx
- 750 cm3
- Elastic Modulus Zyy
- 277 cm3
- Plastic Modulus Sxx
- 886 cm3
- Plastic Modulus Syy
- 425 cm3
- Radius of Gyration rxx
- 8.13 cm
- Radius of Gyration ryy
- 4.77 cm
- Source Doc
- british-steel-european-he
- Verified
- Verified Note
- Parsed from the British Steel European HE sections datasheet (carbon steel, hot-rolled, EN 10365). Source registered; cross-validated by Wel.y = Iy/(h/2).
180 HEM Overview
The 180 serial size group contains 1 section, ranging from 88.9 kg/m to 88.9 kg/m. All sections in this group share the same nominal depth and width but differ in web and flange thickness, which affects the weight and structural capacity.
Section properties are sourced from the Tata Steel Blue Book / SCI P363. For structural design to BS EN 1993-1-1 (Eurocode 3), use these properties with the appropriate partial factors from the UK National Annex.
Powered by SteelSpec
Section properties from EN 10365:2017 / ArcelorMittal European Sections.